YDL 6.2 in fullscreen question...

YDL running on the Sony Playstation 3

Moderator: billb

YDL 6.2 in fullscreen question...

Postby Psychokillaz79 » 02 Aug 2010, 18:55

I edited my gedit.conf and changed it to 131. This helped and made it fullscreen. Although it is a bit over-scaled but not to bad. Is there an easy fix to make it fit perfect? (if not I can live with it like this) It isn't that bad. Better than the black bars all the way around imo
Psychokillaz79
ydl beginner
ydl beginner
 
Posts: 35
Joined: 30 Jul 2010, 11:22

Re: YDL 6.2 in fullscreen question...

Postby ppietro » 02 Aug 2010, 19:00

Psychokillaz79 wrote:I edited my gedit.conf and changed it to 131. This helped and made it fullscreen. Although it is a bit over-scaled but not to bad. Is there an easy fix to make it fit perfect? (if not I can live with it like this) It isn't that bad. Better than the black bars all the way around imo


There's two ways.

1.) See if your TV/Monitor has a "full pixel" or "1:1" mode. On my Bravia, it's called Full Pixel.

2.) There's a guide here to use a utility called fbset to create custom screen resolutions.
viewtopic.php?p=21232#p21232
Since you're using 6.2, don't worry about the custom kernel it mentions - fbset is already built-in to YDL 6.2

Cheers,
Paul
User avatar
ppietro
Site Admin
Site Admin
 
Posts: 4965
Joined: 13 Sep 2007, 22:18

Re: YDL 6.2 in fullscreen question...

Postby Psychokillaz79 » 02 Aug 2010, 19:33

I'm rockin a 1080p Samsung. Idk if it has that feature or not. I don't recall it. I'll have to search. Ty for walkthrough. I'll give it a go
Psychokillaz79
ydl beginner
ydl beginner
 
Posts: 35
Joined: 30 Jul 2010, 11:22

Re: YDL 6.2 in fullscreen question...

Postby billb » 02 Aug 2010, 19:46

Psychokillaz79 wrote:I'm rockin a 1080p Samsung. Idk if it has that feature or not. I don't recall it. I'll have to search. Ty for walkthrough. I'll give it a go


Usually called "Just Scan" on Samsung
PS3 60GB [CECHA01], FW 3.15, YDL 6.2, Samsung T260HD @ 1920x1200
Powermac G4 1.25 GHz x2, 2 GB RAM, YDL 6.2
User avatar
billb
Site Admin
Site Admin
 
Posts: 5522
Joined: 24 May 2007, 20:30
Location: Eastern NC, USA

Re: YDL 6.2 in fullscreen question...

Postby Psychokillaz79 » 02 Aug 2010, 20:53

I'm not seeing it. This HDTV is only like 2 years old or less too. :(
My picture options - zoom 1, zoom 2, 4:3, wide fit, screen fit, 16:9
Although in Linux it will only let me use 16:9, 4:3 & Wide fit. Fit to screen is blacked out along with zoom1 & 2. Is there anyway to force the TV into allowing me to use all the options? lol
Psychokillaz79
ydl beginner
ydl beginner
 
Posts: 35
Joined: 30 Jul 2010, 11:22

Re: YDL 6.2 in fullscreen question...

Postby ppietro » 02 Aug 2010, 21:30

Psychokillaz79 wrote:I'm not seeing it. This HDTV is only like 2 years old or less too. :(
My picture options - zoom 1, zoom 2, 4:3, wide fit, screen fit, 16:9
Although in Linux it will only let me use 16:9, 4:3 & Wide fit. Fit to screen is blacked out along with zoom1 & 2. Is there anyway to force the TV into allowing me to use all the options? lol


Are you using Component cables by any chance? The choice you'd want would be "screen fit" but it might only do that for HDMI.

Cheers,
Paul

P.S. Just guessing here - I don't have a Samsung - only a Sony - but it follows those rules.
User avatar
ppietro
Site Admin
Site Admin
 
Posts: 4965
Joined: 13 Sep 2007, 22:18

Re: YDL 6.2 in fullscreen question...

Postby Psychokillaz79 » 02 Aug 2010, 21:51

Yes. I'm on component cables on phat... I have a Monster HDMI cable on slim but I actually like the way component HD looks too. (hardly any difference but imo looks a tad better on component. even though I know HDMI is 1080p and component cables is 1080i. although i do like the features the PS3 gives you with HDMI) I had the component cable on phat due to watching blu-rays on that box. I'll switch HDMI to phat and component to slim & see if it works.
Psychokillaz79
ydl beginner
ydl beginner
 
Posts: 35
Joined: 30 Jul 2010, 11:22

Re: YDL 6.2 in fullscreen question...

Postby ppietro » 02 Aug 2010, 23:54

Psychokillaz79 wrote:Yes. I'm on component cables on phat... I have a Monster HDMI cable on slim but I actually like the way component HD looks too. (hardly any difference but imo looks a tad better on component. even though I know HDMI is 1080p and component cables is 1080i. although i do like the features the PS3 gives you with HDMI) I had the component cable on phat due to watching blu-rays on that box. I'll switch HDMI to phat and component to slim & see if it works.


Just a side note. Component should be able to do 1080p on the PS3 as well. At least, my Bravia will support that - I'm guessing the Samsung will as well.

Cheers,
Paul
User avatar
ppietro
Site Admin
Site Admin
 
Posts: 4965
Joined: 13 Sep 2007, 22:18

Re: YDL 6.2 in fullscreen question...

Postby xnonsuchx » 05 Aug 2010, 04:50

HDMI connections are often the only ones that HDTVs have the exact pixel fit option. That's the case on my Sharp Aquos (I don't recall the exact option name), but I can only do that at 1080p since I have the FW 3.1x problem of no 720p via HDMI. The best setting I have at 720p via component just barely cuts off a few lines of pixels, so works pretty well. Some TVs may also have not-publicly-documented service menus that MAY have options to fine tune settings, but that could be a do-at-your-own-risk-if-you're-that-desperate kinda thing. www.avforums.com has a lot of TV tech stuff and seems to be a good place to ask technical questions like that.
xnonsuchx
ydl beginner
ydl beginner
 
Posts: 28
Joined: 23 Jan 2010, 02:31

Re: YDL 6.2 in fullscreen question...

Postby relet » 21 Dec 2018, 02:26

Still someone can tell how to set Mode=131 in gedit.conf?
Where is the file, or set other configuration file?
I just got an old ps3 installed YDL6.2 suffered the black border problem :D
relet
ydl beginner
ydl beginner
 
Posts: 29
Joined: 13 Dec 2011, 00:24


Return to Playstation 3

Who is online

Users browsing this forum: No registered users and 18 guests

cron